Tekelec Business Analog Telephone Скачать руководство пользователя страница 34

Страница: 34 / 145

Business Analog Telephone User Guide

Telephone Features

Dialing In Too Early

If you dial the Meet-Me Conferencing number more than five minutes prior to the
scheduled conference call time, you will hear the following message and the
system will then disconnect:

“Your conference is not scheduled to start until (time) on (day, date). Please
call back at that time.”

When...

And if...

Then

You dial #2.

N/A

You hear the
announcement that was
playing at time silence was
started

The conference
reservation state changes
from Starts Soon to Active.

You are the only caller
connected to the
conference.

You hear the First Caller
announcement.

The conference
reservation state changes
from Starts Soon to Active.

There are additional callers
connected to the
conference.

You are connected to the
conference.

The conference
reservation state changes
from Active to Ends Soon.

You are the moderator and
only caller connected to the
conference.

You hear the Ends Soon
announcement.

Another participant joins
the conference.

You were listening to the
First Caller announcement
when silence was started.

You will be connected to
the conference.

You are the moderator.

You perform any floor
control operation.

You will be prompted with
the appropriate
announcement and
connected to the
appropriate announcement
based on the conference
state.

The Start Soon
announcement was playing
when silence was started.

The moderator mutes or
unmutes you.

You will hear the Starts
Soon announcement.

The conference bridge
state changes for some
reason.

N/A

You will hear the Starts
Soon, First Caller or Ends
Soon announcement
depending on the
conference reservation
state.

Содержание Business Analog Telephone


















































































































































Результаты поиска

Содержание Business Analog Telephone

Отзывы:

Бренды по названию

Популярные бренды

Tekelec Business Analog Telephone, Руководство пользователя

Результаты поиска

Содержание Business Analog Telephone

Отзывы:

Бренды по названию

Популярные бренды