Tekelec Business Analog Telephone, Руководство пользователя

Страница: 28 / 145

Business Analog Telephone User Guide Telephone Features 17
620-05600190
2. Dial the phone number that you want to not show your Caller ID to.
Conference
If supported by your system, you can conference several internal and/or external
parties together. Check with your system administrator for the availability of this
feature on your system.
To create a conference call, follow these steps:
1. Make a call or be engaged in a call.
2. Flash the switchhook.
3. Dial the number of the person that you want to include in the conference.
4. When the person answers, inform the party about the conference and then
flash the switchhook to add that party into the conference call.
5. Repeat steps 2-4 to add additional parties to the conference.
Conference Call Tips
•
The parties connected to the conference call remain connected to each
other while you add additional parties. They may carry on a conversation
with each other while you finish adding parties to the conference.
•
Even if the call initiator disconnects, any of the other parties (who have
the conference feature) can use it to add new parties.
•
To place a conference call on hold, flash the switchhook and hang up. The
other parties can talk among themselves but they can’t hear you. Pick up
the handset to re-join the conference.
•
When you put the call on hold, a beeping tone automatically sounds every
few seconds.
•
To transfer a conference call to another telephone do the following:
•
Flash the switchhook.
•
Press *08.
•
Dial the number to which you want to transfer the call.
•
Flash the switchhook again.
Dial Tone and Ringer Patterns
The T6000 telephone system generates different ringer and dial tones, depending
on call conditions.
There are two types of dial tone:
•
Internal Dial Tone – A continuous, higher-pitched tone
•
External (Outside) Dial Tone – A continuous, lower-pitched tone