Tekelec Business Analog Telephone Скачать руководство пользователя | Manualshive

Страница: 23 / 145

background image

12

Telephone Features

Business Analog Telephone User Guide

Call Forward (No Answer)

Call Forward (No Answer) allows you to forward calls that are unanswered at your
phone (when the phone is not being used) to the number you enter.

IMPORTANT:

If you are on a call and another call comes to your phone, the

phone is considered busy. If the second call is not answered, it will follow the
Call Forward - Busy treatment.

Calls forwarded to an external number (7- or 10-digits) that are unanswered will roll
over to voice mail (if available) at that number. Calls forwarded to an internal
number (4-digit extension) that are unanswered will roll over to voice mail (if
available) for the called party (not the forwarding destination).

External forwarding must be supported by your system for external numbers to be
accepted. Be sure to include the access code for an outside line and the area code,
if necessary, with the external number. Up to 20 digits may be entered.

Enabling Call Forward (No Answer)

1.

Pick up the handset.

2.

Press

78*

on the telephone keypad.

•

If you do not have a previously configured forward number, you will be
instructed to enter a forwarding number and press #.

•

If you previously configured a forwarding number, you will be instructed
to do one of the following:

•

Press

1

to enable forwarding. Go to step 9.

•

Press

2

to change the current forwarding number. Go to step 3.

3.

Enter the number to which you want to forward all your calls when you do not

answer the phone. Be sure to enter the number exactly as you would if you
were to call that number. Include the area code, if necessary.

4.

Press

#

on the telephone keypad.

5.

A prompt asks you to confirm the forwarding number by pressing # or re-enter

the forwarding number by pressing *.

•

If you entered an external number, but are not allowed to forward calls to
external numbers, a prompt states the number is invalid and requests you
enter a number.

6.

If you pressed *, return to step 3 or hang up.

7.

If you pressed #, you are offered the option to verify the forwarding number.

•

Press

1

to verify the number you entered.

•

Press

2

to enable the number. Go to step 9.

8.

If you pressed 1, the forwarding number is dialed.

«
...
21
22
23
24
25
...
»

Содержание Business Analog Telephone


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Business Analog Telephone

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 34

Бренд: NEC Страницы: 4

Бренд: NEC Страницы: 19

Бренд: NEC Страницы: 17

DSX-40 DEMO KIT

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 22

FREELANCE XD 5100

Бренд: BT Страницы: 2

80-6113-00 - AT&T E5812B - 5.8 GHz Dual Handset Answering System

Бренд: VTech Страницы: 50

Бренд: J-3 International Holding Co. Страницы: 5

980590-0403 - Cordless Internet Handset USB VoIP Wireless Phone

Бренд: Logitech Страницы: 2

Бренд: AT&T Страницы: 40

Бренд: Rath Страницы: 9

Бренд: Uniden Страницы: 28

Memco 453 000AU

Бренд: AVIRE Страницы: 18

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды