Tekelec Business Analog Telephone Скачать руководство пользователя | Manualshive

Страница: 21 / 145

background image

10

Telephone Features

Business Analog Telephone User Guide

7.

If you pressed 1, the forwarding number is dialed.

•

Call is answered by a person:

Explain your call, have them hang up,

and then press # to enable the forwarding number or * to exit without
enabling forwarding.

•

Call is not answered:

Prompt explains call not connected and asks you

to press # to enable the forwarding number or * to exit without enabling
forwarding.

•

Answering machine or voice mail answers:

Press # to escape, and

then press # to enable the forwarding number or * to exit without enabling
forwarding.

8.

Forwarding for all calls is enabled.

NOTE:

When Call Forward (All) is enabled, you will hear the message

“Forward, forward, forward” when you pick up the handset.

Disabling Call Forward

(All)

1.

Pick up the handset and press

73*

on the telephone keypad.

2.

Call forwarding (all) is disabled and the phone hangs up.

Call Forward (Busy)

Call Forward (Busy) allows you to forward calls arriving at your phone while it is
busy to be forwarded to the number you enter. Calls will not ring at your phone and
will be sent to the number entered as the forward destination.

Calls forwarded to an external number (7- or 10-digits) that are unanswered will roll
over to voice mail (if available) at that number. Calls forwarded to an internal
number (4-digit extension) that are unanswered will roll over to voice mail (if
available) for the called party (not the forwarding destination).

External forwarding must be supported by your system for external numbers to be
accepted. Be sure to include the access code for an outside line and the area code,
if necessary, with the external number. Up to 20 digits may be entered.

Enabling Call Forward (Busy)

1.

Pick up the handset.

2.

Press

76*

on the telephone keypad.

•

If you do not have a previously configured forward number, you will be
instructed to enter a forwarding number and press #.

•

If you previously configured a forwarding number, you will be instructed
to do one of the following:

•

Press

1

to enable forwarding. Go to step 9.

•

Press

2

to change the current forwarding number. Go to step 3.

«
...
19
20
21
22
23
...
»

Содержание Business Analog Telephone


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Business Analog Telephone

Бренд: Xorcom Страницы: 9

Бренд: Paradyne Страницы: 4

KX-T7400 Series

Бренд: Panasonic Страницы: 1

Бренд: Panasonic Страницы: 242

Бренд: Firstcom Страницы: 37

TRU341 - TRU 341 Cordless Phone

Бренд: Uniden Страницы: 20

Бренд: Topcom Страницы: 72

Бренд: AT&T Страницы: 45

Бренд: SoftBank Страницы: 307

Бренд: Mitsubishi Electric Страницы: 102

Бренд: Toshiba Страницы: 2

Бренд: Toshiba Страницы: 2

Strata AirLink DK424

Бренд: Toshiba Страницы: 8

Strata AirLink DK40i

Бренд: Toshiba Страницы: 12

Strata Cix DKT2504-DECT

Бренд: Toshiba Страницы: 64

Strata CTX DKT2104-CT

Бренд: Toshiba Страницы: 104

STRATA CTX DKT2004-CT

Бренд: Toshiba Страницы: 111

Бренд: Toshiba Страницы: 153

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды