Tekelec Business Analog Telephone страница 16 Скачать руководство пользователя

Страница: 16 / 145

Business Analog Telephone User Guide

Telephone Features

620-05600190

Press the digits of the Abbreviated Dial code to delete followed by the

sign.

A confirmation message tells you: “No number was entered.”

Program or verify another Abbreviated Dial code or hang up to exit.

Verifying an Abbreviated Dial Number

Pick up the handset and press

75*

Press

to verify (check) an Abbreviated Dial code (00-99).

Press the Abbreviated Dial code you wish to verify.

The phone number you entered for this Abbreviated Dial number is repeated
back.

Program or verify another Abbreviated Dial code or hang up to exit.

Anonymous Call Rejection

When enabled, this feature rejects calls from callers who block the display of their
caller ID information.

Enabling Anonymous Call Rejection

Pick up the handset and press

*77

on the telephone keypad.

Hang up.

On any subsequent incoming call that provides no caller ID, the calling party gets
a message that the party they are calling does not accept anonymous calls.

Disabling Anonymous Call Rejection

Pick up the handset and press

*87

on the telephone keypad.

Hang up.

Authorization Code Calling

This feature is available system-wide to allow/deny long distance dialing and does
not appear as a button on your telephone.

If you are required to enter an authorization code for a call, follow these steps:

Access an outside line.

Press the

sign.

Enter the authorization code (obtained from your system administrator).

When the correct code is entered, you hear dial tone.

Содержание Business Analog Telephone


















































































































































Результаты поиска

Содержание Business Analog Telephone

Отзывы:

Похожие инструкции для Business Analog Telephone

Бренды по названию

Популярные бренды

Tekelec Business Analog Telephone, Руководство пользователя

Результаты поиска

Содержание Business Analog Telephone

Отзывы:

Похожие инструкции для Business Analog Telephone

Бренды по названию

Популярные бренды