5. Commissioning
WARNING
Dangers arising from a defective condition of the unit. There is also a risk to the eyes
if there is a direct view of the UV-C lamp.
Make sure that the measures described in this chapter are completed before the
commissioning of the unit. All doors of the unit must be closed and all necessary connections
must be attached before turning the unit on. Do not operate the unit if any components are
defective, missing or damaged. Check the orderly condition of the unit before switching it on.
The unit must not be operated without a filter element.
NOTICE
Damaged supply lines.
Make sure that the supply lines are protected against damage by forklift trucks and similar
events. Protect all supply lines from heat, moisture, oil and sharp edges.
5.1. Electrical connection
NOTICE
Electric malfunction possible in cause of an incorrect power supply.
Pay attention to the admissible supply voltage. Please observe the specifications on the type
plate.
●
Connect the mains cable (see chapter 2.1) to the power supply.
●
Insert the cable with the Harting connector into the corresponding jack. This supplies the UV-C
lamps with electricity.
BA_VIROLINE-TOWER_201111_EN
8
12.01.2022
