GB
The oven should be
installed according to the
corresponding manual.
An opening of 20 mm
should be made in the back part of
the cabinet in order to allow cold
air to enter (see figure 1).
When hobs are handled
before being installed, care
should be taken in case there is
any protruding part or sharp
edge which could cause injury.
When installing units or
appliances above the hob, the
hob should be protected by a
board so that the glass cannot
be damaged by accidental
blows or heavy weights.
The glues used in
manufacturing the kitchen unit
and in the adhesive on the
decorative laminate of the
worktop surface should be
made to tolerate tem-peratures
of up to 100ºC.
TEKA assumes no
responsibility
for
any
malfunction or damage caused
by faulty installation.
PLEASE REMEMBER THAT THE
GUARANTEE
DOES
NOT
COVER THE GLASS IF IT
SUFFERS A VIOLENT BLOW OR
IF IT IS USED IMPROPERLY.
INSTALLATION WITH FAN OVEN
UNDER THE HOB
31
