GB
22
There is a container, cloth
or liquid covering the Touch
Control.
Remove any object that
might be covering the
Touch Control.
The hotplate had not been
set correctly.
Make sure that the time
was set following the ins-
tructions manual.
The hob (or any of the hotplates) powers off during cooking
A timed hotplate failed to power off at the end of the set time
There is a cloth, container
or liquid on the Touch
Control.
Remove any object covering
the Touch Control and/or
clean any liquid that might
have been spilt on it.
The hob suddenly starts to bleep
The timer was activated
and the preset time has
finished.
Touch the clock sensor to
deactivate the bleep.
One or several of the hot-
plates has overheated.
Allow the overheated hot-
plates to cool down for a
few minutes before powe-
ring them up again.
Fault
Possible cause
Possible solution
There is a powerful light
affecting the control panel.
Don't apply powerful lights
(for example, halogen spo-
tlights) over the control
panel when connecting the
hob to the electrical
current. A very powerful
light may cause the sensor
buttons not to calibrate
correctly after a power
outage.
After a power outage (or the first time the hob is connected), the
control panel remains blocked