Service Manual
Service Manual:
MSDW16012
- 13 -
11.
LP8 850 (VR02 / VR03)
1. ON / OFF button
5. Dual wash button
2. Delay button
6. Program phase indicators
3. Program indicators
4. Program button
Wiring diagram:
See section 3
Optional Components:
Aquastop (inlet hose), Alternate wash valve (Opc.(1))
Hydraulic diagram:
See section 2
Error indication:
Display
Service Test
Follow the next steps to launch the test service:
- Connect the appliance to the power supply.
- Keep pressed the Program button [4]. The door must be open.
- Press and release ON/OFF button [1]. All leds from control panel start to blink.
- Once the door is closed, service test will start.
You can advance to the next step of the test by pressing the Program button [4],
except during water loading.
