Watt setting:
The power level currently set on the Dna 40
Battery indicator:
The current state of charge of the battery.
Temperature display:
When not firing, the maximum heating coil temperature
setting. While firing, the actual temperature of the heating coil is displayed.
Ohms display:
The resistance of atomizer attached to the device. This is measured
only when the unit is supplying power to the atomizer. At other times, it shows
the most recent measurement.
Non-temperature Protected
Watt setting:
The power level currently set on the Dna 40.
Battery indicator:
The current state of charge of the battery.
Volts display:
The output voltage being supplied to the atomizer.
Ohms display:
The resistance of atomizer attached to the device. This is
measured only when the unit is supplying power to the atomizer. At other times,
it shows the most recent measurement.
Modes
Locked mode:
Pressing the
Fire
button five times with less then0.7 seconds
between presses will cause the device to enter Locked mode. In locked mode, the
device will not fire and the output power will not adjust accidentally. While in
Locked mode, the screen will be off, except that pressing a button will show
“
Locked, Click 5x
”. To exit locked mode, press the fire button 5 times.
Stealth mode:
While locked, holding the
Fire
and
DOWN
buttons simultaneously
for 5 seconds will switch to stealth mode. In this mode the display is off. It will still
exit power locked mode the
Fire
and
DOWN
buttons simultaneously for 5
