TEJAS BORJA Roof&Plug SOLAR FLAT-5XL, Инструкция по установке и безопасности

Страница: 32 / 36

8 MAINTENANCE
9 PRECAUTIONS FOR SYSTEM SHUTDOWN
10 WARRANTY
The manufacturer recommends that any kind of
work or maintenance on sloping roofs made using
Tejas Borja products be carried out by trained
personnel always following the instructions in
the relevant manual and current regulations.
Always use PPE.
To ensure the optimal performance of the
SOLAR
FLAT-5XL ceramic roof tiles , Tejas Borja
recommends the following maintenance measures:
An annual service is recommended. Clean the glass
surface of the solar tiles. When cleaning, always use
clean water and a sponge or non-abrasive cloth.
Carry out a visual inspection of the
SOLAR FLAT-
5XL ceramic roof tiles to check for any possible
damage and/or defects.
Inspect all the visible cabling and check the mechanical
fixings of the cabling. Make repairs where necessary.
Check the inverter is operating correctly and check
the error code logs if available.
Check the performance of the registration system
and test the voltage. The voltage and current report
must be within the parameters of the system design.
If a problem occurs, contact Technical Support.
In the event it is necessary to replace any piece of
the installation, the installer must make sure that
the new pieces are specified by the manufacturer
and their characteristics are the same as those of
the original pieces. Non-authorized substitutions
may lead to fires, electric discharges or other
hazards and the voiding of the warranty.
Warning: maintenance must be carried out by
trained personnel, respecting the manufacturer’s
instructions for each system component (solar tiles,
inverters, batteries, etc.).
Compile a maintenance report, including the expected
electricity output and the real output. Note any time of
inactivity or failures in the system during the maintenance
process. The completed report must include the date
and must be duly signed.
When in operation, the installation has a high
voltage and current which may put the lives of those
handling it at risk.
To prevent the generation of electricity during removal,
SOLAR FLAT-5XL ceramic roof tiles must be
completely covered with an opaque material.
Removal of the tiles must only be carried out
AFTER the system has been turned off. Follow
the instruction manuals for each component in
the system. Only trained personnel may detach and
remove the solar tiles.
The SOLAR FLAT-5XL ceramic roof tile has a 10-
year warranty.
a) SOLAR FLAT-5XL ceramic roof tile
MONOCRYSTALLINE – The first year, output
will be above 99% and over 80% for 20 years
after the start of the WARRANTY.
b) SOLAR FLAT-5XL ceramic roof tile CIGS –
The first year, output will be above 97% and above
80% for 25 years from the start of the WARRANTY.
Check the terms and conditions of the warranty for the
SOLAR FLAT-5XL ceramic roof tile
on our website.
32