3. Polishing
Use an optional wool pad. Run the tool at low speed and apply the Wool pad gently to the work
surface.
MAINTENANCE
1. Always be sure that the tool is switched off and the battery cartridge is removed
before attempting to perform inspection or maintenance.
2. Never use gasoline, benzine, thinner, alcohol or the like. Discoloration,
deformation or cracks may result.
WARNING
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement,
any other maintenance or adjustment should be performed by TEH Authorized Service Centers,
always using TEH replacement parts.
WARRANTY CARD
ladies/gentlemen：
employer：
contact number：
fax number：
contact address：
warranty record：
post code：
IMPORTANT NOTE
1. The invoice and warranty card must be presented at the time of warranty.
2. The fuselage number on the invoice is the same as the fuselage number on the warranty card.
3. Once this warranty card is issued, if it is lost, it will not be reissued. Please keep it properly.
Note: The company reserves the right to amend the above provisions and has the final interpretation right in the
case that the warranty service does not violate national laws.
Dear customers, the warranty service for purchasing TEH products is as follows:
Under normal use, within one year from the date of purchase. It is guaranteed that the damage
is caused by the quality of the tool.
The
following
conditions
occur
during
the
warranty
period
,
not
covered
by
the
warranty
:
a. Any valid legal document (single ticket) certifying the date of purchase
b
. Any damage caused by natural wear and overload
c. Any damage caused by the use of low-priced inferior accessories
d. Any damage caused by improper carrying, transportation or storage
e. Any product that has been opened, repaired, replaced, or modified by itself
f. Any damage caused by misuse, beyond the scope of use of the tool,
and failure to use and maintain in accordance with the instructions
13
14
