Owner’s manual
11
EN
The device is electrically safe and is designed for use in the bathroom- it is suitable for cleaning
under running water but it is not meant to be used underneath the water.
CHARGING
1. Connect one end of the microUSB cable with the microUSB port of the device.
2. Connect the other end to the power supply socket.
3. When charging has finished, disconnect the AC adapter from power supply and the
device.
Notes:
•
It takes about 60 minutes to fully charge the device what provides about 120 minutes
of shaving time.
LED indicators
1. During charging, all LED indicators flash alternately.
2. When the battery level is lower than 10%, first LED indicator flashes red. It indicates
that the device must be charged.
3. When the battery level reaches 10%, red light turns white and flashes.
4. When the battery level reaches 20%, first indicator stops flashing and lights white
while the second one starts flashing.
5. When the battery is fully charged, all five LED indicators light white.
OPERATION
Shaving:
1. Press power button to turn on the shaver.
2. Move the shaving head against the direction of beard growth
using both circular and straight movements.
3. Gently press shaver to the skin, so the floating blades can easily
follow the contours of your face.
4. After shaving turn off the appliance by pressing power button.
5. Clean the shaver according to the instructions included in “Cleaning” section.
6. Put the protective cap on the shaving head to protect the blades from any damage.
Note:
•
The device is water-resistant, therefore it can be also used on wet skin.
•
It is also possible to use the shaver together with the shaving foam.
•
Your skin may need 2 or 3 weeks to get accustomed to the new shaving system.
Trimming
1. Push the trimmer release slide downwards to open the trimmer.
2. Turn on the appliance.
3. Start trimming.
