8
www.teejet.com
MATRIX
®
Pro 570GS • MATRIX
®
Pro 840GS
SE
TUP
GUID
ANCE
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
HOME
SIMPLE MODE
Once the power up sequence has completed, the Home screen
will appear with the option to start a new job or continue an
existing job.
The console must have GNSS before starting or continuing a job.
New job
Starting a new job will clear the previous job data.
To start a New Job:
1. On the Home screen , press
New Job
.
The console will jump to Vehicle View.
Continue job
To continue the existing job:
1. On the Home screen , press
Continue
.
The console will jump to Vehicle View and begin providing
navigation information.
If a selected job is in a UTM zone other than the current or
adjacent UTM zone,
Continue
will be disabled.
NOTE: For more information, see the UTM Zone Appendix.
Close job
To close a job:
1. On the Home screen , press
Close Job
.
To create a report of the job when closing a job:
1. Insert a USB drive into the USB port of the console.
2. On the Home screen , press
Close Job
.
3. Select:
►Yes – to create a report of the last job
►No – to return to the Home screen without saving
ADVANCED MODE
Once the power up sequence has completed, the Home screen
will appear with the option to start a new job or continue an
existing job.
The console must have GNSS before starting or continuing a job.
New job
Starting a new job will clear the previous job data.
To start a New Job:
1. On the Home screen , press
New Job
.
2. Press:
►Yes – to automatically generate a name
►No – to enter a name using the on screen keyboard
Client, farm, and field information are inputted using Fieldware
Link.
The console will jump to Vehicle View.
Start job
The Matrix Pro GS is programmed with a field finder tool to assist
the user in finding the job closest to the vehicle’s location. With
GPS acquired, the job pick list will be updated every ten seconds.
During this update, the list of jobs is sorted by distance and the
closest two jobs are displayed on the top of the list. The remaining
jobs are listed beneath these.
To continue the existing job:
1. On the Home screen
, press DOWN arrow
to access
the list of jobs saved in the console.
2. Select the job name to be started/continued.
3. Press
Start Job
.
The console will jump to Vehicle View and begin providing
navigation information.
Distance
If a selected job is in a UTM zone other than the current or
adjacent UTM zone, “Out of Range” will be displayed next to
Distance, and
Start Job
will be disabled.
NOTE: For more information, see the UTM Zone Appendix.
If a selected job has no recorded information, Distance will show
“No Data”.
Close job
To close a job:
1. On the Home screen , press
Close Job
.
To create a report of the job when closing a job:
1. Insert a USB drive into the USB port of the console.
2. On the Home screen , press
Close Job
.
3. Select:
►Yes – to create a report of the last job
►No – to return to the Home screen without saving