DynaJet
®
Flex 7140
INITIAL ST
AR
TUP
MENU OPTIONS
INTR
ODUC
TION
APPENDIX
14
www.teejet.com
OPER
ATION
CONTROL ERRORS & ALERTS
If there is an active control error, the value outline will be will red to indicate the error.
Control alerts will clear themselves when the control has returned to operational range
NOTE: System Component errors appear on the Diagnostics screen. See the Diagnostics section of the Menu Options chapter for
details.
Nozzle Mode Errors
X
Minimum Duty Cycle Error – the desired pressure is not
being maintained by the system.
X
High Pressure Error – the actual pressure is above the high
pressure alarm value.
X
Outside Droplet Size Error – droplet size is not being
maintained by the system.
Figure 3-9: Nozzle Mode – Minimum Duty Cycle Error
Figure 3-10: Nozzle Mode – High Pressure Error
Figure 3-11: Nozzle Mode – Outside Droplet Size Error
Manual Mode Errors
X
High Pressure Error – the actual pressure is above the high
pressure alarm value.
X
Low Pressure Error – the actual pressure is below the
recommended nozzle pressure range.
Figure 3-12: Manual Mode – High Pressure Error
Figure 3-13: Manual Mode – Low Pressure Error
