TeeJet Technologies AEROS 9040, Руководство пользователя

Страница: 71 / 126

63
98-05304-EN R2
Aeros 9040 field computer
HOME
SE
TUP
GUID
ANCE
FULL SCREEN
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
IMPLEMENT
Implement lateral offset adjustment
To calculate an implement offset adjustment using adjacent guidelines:
1. Create a straight AB line.
2. With assisted/auto steering engaged, drive pass

as if you were operating the implement, and place flags at the outside edges of the
implement.
3. Turn around and engage assisted/auto steering on pass

on the adjacent AB guideline. Place additional flags at the outside edges of
the implement or stop while on the AB guideline next to the flags you placed on pass

.
4. Measure the difference  between the flags of pass  and pass  .
5. Divide the measured distance

in half. This difference will be the offset adjustment.
6. Increase or decrease the offset distance  as needed dependent on where the field application overlap occurs and the current
implement offset direction setting.
Field application
Current offset settings
Offset direction = left Offset direction = right
Offset direction = right
offset distance = 0 m
Overlap on the right of pass

or
Gap on the left of pass

Increase distance offset value Decrease distance offset value Increase distance offset value
Overlap on the left of pass  or
Gap on the right of pass

Decrease distance offset value Increase distance offset value
Change to implement offset direction to
left and increase distance offset value
Figure 6-37: Implement lateral offset distance and direction