Teddington Seco+, Инструкция по установке и эксплуатации

Страница: 17 / 27

17
How it works
This product is a dehumidifier. It controls relative humidity by passing the air through the
unit, forcing the excess moisture to condensate over the cooling elements. Contact with this
cold surface causes the moisture in the air to condense. This condensed water then drains
safely into the water tank. The dried air then passes through the condenser where it is
slightly warmed and re-enters the room at a slightly elevated temperature.
Where to position
Excess moisture will travel
throughout your home, in the
same way that cooking smells
waft to every room in the
house. For this reason, the
dehumidifier should be
positioned, so that it can draw
this moist air towards it from
all over the home.
Alternatively, if you have a
serious problem in one area
you can begin by positioning
the dehumidifier close to this
area and later moving it to a
more central point. When positioning the
dehumidifier, ensure that it is
placed on a level surface and
that there is a minimum of 10
cm (4") of space on either side
of the unit to allow for
efficient airflow.
This dehumidifier is fitted with
castors for extra mobility, if
you move the unit, it should
first be switched off and the
water tank emptied. We do not recommend the use
of an extension lead, so please
try to ensure that the unit is
sufficiently close to a fixed
mains socket. If it is necessary
to use am extension lead,
please ensure the diameter of
the wires of the cable is at least
1 mm2.
When the dehumidifier is in
operation, outside doors and
windows should be closed
when necessary for most
efficient use.