MODEL TBC-100
TEDDY BEAR CAMERA
THIS PACKAGE CONTAINS:
1 – Bear Video Camera
1 - Receiver
2 – 9V DC 350mA Power Supply
1 – Audio/Video cable
INTRODUCTION:
Congratulations on purchasing the Teddy Bear Camera. TeddiCAM is the next step in baby monitoring. It uses
2.4GHz wireless technology to transmit live color video and audio from the nursery to any TV in your home.
Because it works on either batteries or an adapter, you can easily move TeddiCAM to any room. Let TeddiCAM
be another pair of eyes and ears when you’re busy*.
You can even record what TeddiCAM sees onto your VCR
when you’re not at home.
•
Not to be used as a substitute for responsible child care.
The high quality Wireless Surveillance System gives an outstanding 300 foot range for transmission of color
CMOS images
FEATURES:
• Range of up to 300 wireless transmission (open field)
• Connects to any TV and /or VCR
• Operating frequency of 2.4GHz on 4 different transmission channels
• Easy to install, takes only 10 minutes
INSTALLATION:
BEAR CAMERA
1. Position the Bear Video camera in a suitable location for surveillance. The camera is located in the left eye of
the bear
2. Unzip the back of the bear and pull out the battery compartment
Note: You can power the bear camera using a 9V alkaline battery (not included) or the provided 9V DC
power adapter
3. You will also see a 4 channel dip switch and power switch located on the side of the battery compartment.
The channel dip switch is factory set to channel 1. A corresponding channel 1 setting must also be selected
on the receiver so that the receiver communicates with the bear camera. Make sure the power switch is set
for “ON”
4. If you are using the AC power adapter plug it into the DC Input jack on the side of the battery compartment
5. Plug the power adapter into an electrical outlet