Tecumseh AH520 -, Руководство пользователя

Страница: 3 / 68

ii
IGNITION ................................................................. 31
IGNITION OPERATION (Pre- 1985
Production) ........................................................ 31
MAGNETO IGNITION ......................................... 31
CONTACT POINTS ............................................. 31
CONDENSER ..................................................... 31
OPERATION OF THE TECUMSEH
MAGNETO IGNITION ....................................... 31
SOLID STATE IGNITION (1985 to Present)...... 32
SOLID STATE IGNITION OPERATION ............. 32
IGNITION SERVICE ............................................... 33
SPARK PLUG SERVICE .................................... 33
FLYWHEEL REMOVAL AND SERVICE............. 33
FLYWHEEL MAGNETS ...................................... 33
FLYWHEEL KEYS............................................... 34
ADAPTER KEY TO FLYWHEEL ASSEMBLY.... 34
FLYWHEEL SLEEVE .......................................... 34
FLYWHEEL TORQUE ......................................... 34
REPLACING MAGNETO BREAKER POINTS .. 34
CONDENSER CHECK ....................................... 34
IGNITION COIL ................................................... 34
IGNITION TIMING .............................................. 34
FIXED TIME SPEED (EXTERNAL COIL) .......... 36
SOLID STATE (CDI) ........................................... 36
OTHER IGNITION SYSTEMS ............................ 36
OUTBOARD TIMING .............................................. 38
OUTBOARD TIMING (STANDARD IGNITION) . 38
OUTBOARD TIMING (SOLID STATE) ............... 39
CYLINDERS & INTERNAL COMPONENTS ......... 41
PISTON & RING SERVICE ................................ 41
CONNECTING ROD SERVICE .............................. 42
NEEDLE BEARINGS .......................................... 42
CRANKSHAFT, BEARING AND OIL SEAL
SERVICE ................................................................. 43
NEEDLE BEARINGS .......................................... 43
Page
This manual contains information on Tecumseh Engines built to comply
with emission regulations. As a technician it is unlawful to modify or
cause a change in the original calibration of these engines. All speed
adjustments must remain within the limits that are specified for each
engine, and are not to exceed the maximum. Any deviation must be
specifically approved by Tecumseh Products Company.
OIL SEALS .......................................................... 43
ONE PIECE SEALS ............................................ 43
THREE PIECE SEALS ....................................... 44
OUTBOARD SEAL SERVICE ............................ 44
CYLINDERS, REEDS & COMPRESSION
RELEASE ................................................................ 45
CYLINDER & HEAD SERVICE .......................... 45
GASKETS............................................................ 45
REED VALVES .................................................... 45
AUTOMATIC COMPRESSION RELEASE
(DOUBLE REED TYPE) ................................. 45
AUTOMATIC COMPRESSION RELEASE
(SINGLE REED TYPE)................................... 45
CYLINDER EXHAUST PORTS .......................... 46
TROUBLESHOOTING............................................ 47
ENGINE FAILS TO START OR STARTS
WITH DIFFICULTY ............................................. 47
ENGINE KNOCKS .............................................. 47
ENGINE MISSES UNDER LOAD ...................... 48
ENGINE LACKS POWER ................................... 48
ENGINE OVERHEATS ....................................... 48
ENGINE SURGES OR RUNS UNEVENLY ....... 49
ENGINE VIBRATES EXCESSIVELY ................. 49
SPECIFICATIONS .................................................. 50
ENGINE TYPE NUMBER AND LETTER
REFERENCE ................................................... 50
SEARS CRAFTSMAN CROSS REFERENCE ...... 51
TABLE OF SPECIFICATIONS ....................... 52 - 61
TABLE OF TORQUE LIMITS ................................. 62
EDUCATIONAL MATERIALS AND TOOLS ......... 63
AVAILABLE TECHNICIAN'S HANDBOOKS ...... 63
AVAILABLE FOREIGN TECHNICIAN'S
HANDBOOKS .................................................. 63
TOOL KIT 670195D ................................................ 64
TOOLS..................................................................... 65
Page