Tecra M1, Руководство пользователя

Страница: 59 / 218

ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK
Getting Started
3-9
Tecra M1
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section Starting up for the
first time in this chapter.
1. Open the display.
2. Press and hold the computer’s power button for two or three seconds.
Turning on the power
Windows XP setup
When you first turn on the power, the computer’s initial screen is the
Microsoft Windows XP Professional Startup Screen Logo.
Follow the on-screen directions.
Turning off the power
The power can be turned off in one of the following modes: Shut down
(Boot), Hibernation or Standby mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode no data is saved and
the computer will boot to the operating system’s main screen.
1. If you have entered data, save it to the hard disk or to a diskette.
2. Make sure all disk activity has stopped, then remove the
CD/DVD-ROM or diskette.
Make sure the Disk, Slim Select Bay and Slim Select Bay’s module
indicators are off. If you turn off the power while a disk is being accessed,
you can lose data or damage the disk.