ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
27
(**) These values could be read and used by the TC to automatically configure the geometry of the
implement. However, they could also be completely overlooked.
Editing SETUP page is allowed only when no treatment is running (it is assumed that a treatment is
running when the main valve is open).
9.3.1 Section Width
This configuration page can be accessed from the SETUP one (page 1 or page 2) by pressing the
key. Specify here the boom the size (expressed in meters with 2 decimal places) and the
number of nozzles present (refer to figure 15 and 16).
Figure 15
The
key returns to the first setup page.
If the number of sections changes, the system will automatically reboot when the new
configuration is saved. This allows the system to actualize the new boom configuration.
From SETUP page 1, 2 or 3
Содержание GEOline 8410073
