TECO F33 Series, Инструкция по эксплуатации, Страница: 57 / 192

54 Operation via the Control Panel
9.3 The menu structure
The menu structure consists of 4 levels:
This structure is consequently independent of the
number of menus per level.
For instance, a menu can have one selectable menu
(Set/View Reference Value [310]), or it can have 17
selectable menus (menu Speeds [340]).
Fig. 66 Menu structure
9.3.1 The main menu
This section gives you a short description of the func-
tions in the Main Menu.
100 Preferred View
Displayed at power-up. It displays the actual process
value as default. Programmable for many other read-
outs.
200 Main Setup
Main settings to get the VSD operable. The motor data
settings are the most important. Also option utility and
settings.
300 Process and Application Parameters
Settings more relevant to the application such as Refer-
ence Speed, torque limitations, PID control settings,
etc.
400 Shaft Power Monitor and Process
Protection
The monitor function enables the VSD to be used as a
load monitor to protect machines and processes
against mechanical overload and underload.
500 Inputs/Outputs and Virtual
Connections
All settings for inputs and outputs are entered here.
600 Logical Functions and Timers
All settings for conditional signal are entered here.
700 View Operation and Status
Viewing all the operational data like frequency, load,
power, current, etc.
800 View Trip Log
Viewing the last 10 trips in the trip memory.
900 Service Information and VSD Data
Electronic type label for viewing the software version
and VSD type.
9.4 Programming during
operation
Most of the parameters can be changed during opera-
tion without stopping the VSD. Parameters that can not
be changed are marked with a lock symbol in the dis-
play.
9.5 Editing values in a menu
Most values in the second row in a menu can be
changed in two different ways. Enumerated values like
the baud rate can only be changed with alternative 1.
Alternative 1
When you press the + or - keys to change a value, the
cursor is blinking to the left in the display and the value
is increased or decreased when you press the appropri-
ate key. If you keep the + or - keys pressed, the value
will increase or decrease continuously. When you keep
the key pressed the change speed will increase. The
Toggle key is used to change the sign of the entered
Main Menu
1st level
The first character in the menu number.
2nd level The second character in the menu number.
3rd level The third character in the menu number.
4th level The fourth character in the menu number.
NOTE: If there are more than 10 menus within one level,
the numbering continues in alphabetic order.
NG_06-F28
4161
4162
NOTE: If you try to change a function during operation
that only can be changed when the motor is stopped, the
message “Stop First” is displayed.
2621 Baudrate
Stp 38400