31
Fn_24
:
Jog Speed Reference
= 0 - 400Hz
Fn_25
:
Master Speed Reference from Keypad
= 0 - 400Hz
Note:
1. The Inverter will operate under the Jog Speed function at (
Fn_24
). You can assign either
(
Fn_56
) (
Fn_57
) or (
Fn_58
) to handle the Jog function.
2. The Inverter will operate under the Preset Speed frequencies when (
Fn_56
) (
Fn_57
) or (
Fn_58
)
are assigned to this function.
3. If the Process Timer (
Fn_84
) is turned ON and either (
Fn_56
) (
Fn_57
) or (
Fn_58
) has been
assigned for input function, and if a pulse signal or contact closure is received on the Multi-
Function Input, the Inverter will run at the preset time based on the setting in (
Fn_85
) (
Fn-86
)
(
Fn_87
) (
Fn_88
) (
Fn_89
) (
Fn_90
) and (
Fn_91
). The sequence will continue until all Process
Timers are finished. The Inverter will then return to the frequency set by the Keypad or by the
External Speed Pot or jump back to 0 speed to receive the next sequence.
4. A new Speed Setting or Timer Sequence cannot be inserted during an active sequence.
Preset Speed
Terminal 8
Preset Speed
Terminal 7
Preset Speed
Terminal 6
Jog Terminal
Output
Frequency
(Hz)
Operation Time
X
X
X
X
Fn_25
X
X
O
X
Fn_17
Fn_85
X
O
X
X
Fn_18
Fn_86
X
O
O
X
Fn_19
Fn_87
O
X
X
X
Fn_20
Fn_88
O
X
O
X
Fn_21
Fn_89
O
O
X
X
Fn_22
Fn_90
O
O
O
X
Fn_23
Fn_91
--
--
--
O
Fn_24
O: TERMINAL ON
X: TERMINAL OFF
--: NO EFFECT
