©2016 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
18
Tecnotion
| www.tecnotion.com | [email protected]
Ironless linear mot
or manual - v
er
. 1.03
INSTALLATION
CH 3
3.7.8 NTC Characteristic
The Coil has a NTC temperature sensor for monitoring the temperature.
Graph 3.15: Temperature dependency of the NTC
0
0
50
100
150
R
ntc
°C
Ω
T
R
10000
20000
20000
30000
Sensor specification of NTC-sensor
Tolerance ΔR
R
/ ΔR
R
5%
Max power
60mW
Table 3.16: Scheme for obtaining a linear voltage signal from the NTC-sensor
T (ºC)
0
10
20
30
40
50
60
R
NTC
(Ω)
32650
19900
12490
8057
5327
3603
2488
T (ºC)
70
80
90
100
110
120
130
R
NTC
(Ω)
1752
1258
918
680
511
389
301
3.7.9
Polarization test
Before testing, make sure that the electrical and mechanical
protection of the linear motor system is well configured!
Make sure that there is an effective protective earth. Make sure
that there is no voltage at the wire terminals before connecting.
There is one regular way of testing the polarization. Some servo amplifiers
can operate in an in moment service mode. By means of regulating an ex-
ternal resolver manually, it can be determined whether the motor’s direc-
tion of running conforms the resolver’s sense of rotation. If so, the motor
is well connected. If not, two phases of the power cable – phase 1 and 3
– must be changed.
Internally all ironless linear motors are equally wired and connected, so one
test satisfies to find out the polarization of a motor ruler combination. If
more axes are constructed in exactly the same way the polarization will be
equal.
For more information, please contact Tecnotion.
Содержание UC3 Series
Страница 1: ...Ironless linear motor manual...