Tecnare Sound Systems T-44 Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 58

background image

T-44/48 Series Amplifier

Operation Manual

T-44/48 Series | rev.

firm. 1.258 and above

8

1

Welcome and Installations instructions

1.1 Thanks and unpacking

Thank you for choosing a Tecnare T-44/48 Series Advanced System Amplifier for your

application. Please spare a little time to study the contents of this manual, so that you obtain the
best possible performance from this unit.

Please spare a little time to study the contents of this manual, so that you obtain the best

possible performance from this unit. Control and editing features are accessible via the front
panel interface or via the included System Engineer software.

All Tecnare

®

products are carefully engineered for world-class performance and reliability.

If you would like further information about this or any other Tecnare

®

product, please

contact us. We look forward to helping you in the near future.

Information and specifications are subject to change. Updates and supplementary

information are available on the Tecnare

®

website:

http://www.tecnare.com

Tecnare Technical Support is available at:

•

(T): +34 918 170 110 - +34 918 171 001

•

(e-mail): [email protected]

Thank you again for placing your confidence in Tecnare

®

products.

1.2 Unpacking

After unpacking the unit please check carefully for any damage to the device or the supplied

accessories. Every Tecnare product is tested and inspected before leaving the factory and
should arrive in perfect condition. If damage is found, please notify the carrier concerned at
once. You, the consignee, must instigate any claim. Please retain all packaging in case of future
re-shipment.

1.3 The User Guide

This user manual gives a progressively more detailed description of the functions of the

Tecnare T-44/48 Series Advanced System Amplifier. A pages quick reference guide is provided
for those users who are experienced with this type of equipment and just need to know how to
‘drive’ the front panel. A detailed explanation of the front and rear panel controls and indicators
is contained in the next section.

The final section describes each individual function or feature with annotated images

explaining its use. Where appropriate, the graphical display is shown to further elaborate on the
units operation.

To complete the manual a reference section is included, describing the technical

performance and Mechanical drawing of the device complete with graphs of filter responses.

«
...
7
8
9
10
11
...
»

Содержание T-44 Series



























































Отзывы:

Нет отзывов

Похожие инструкции для T-44 Series

Бренд: Sansui Страницы: 16

Бренд: DAPAudio Страницы: 13

Бренд: DAPAudio Страницы: 18

Бренд: DAPAudio Страницы: 18

Palladium P-400

Бренд: DAPAudio Страницы: 18

Бренд: DAPAudio Страницы: 16

Бренд: T&M Performance Страницы: 11

Бренд: Martin Ranger Страницы: 10

Бренд: Akai Страницы: 21

Wireless2100-System

Бренд: MultiChannel Страницы: 43

Бренд: Kramer Страницы: 12

Бренд: Harley Benton Страницы: 2

Бренд: Zaxcom Страницы: 9

Two-Rock Custom Reverb Signature V3

Бренд: K&M Analog Designs Страницы: 9

British Citrus BC-5

Бренд: Yerasov Страницы: 8

Multi-Purpose Amplifier

Бренд: VXI Страницы: 1

CLEAN SINK MKII

Бренд: 3rd Power Страницы: 11

Бренд: Adcom Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды