TE70 IR-HEATER
PAGE 5
Allows the user to access the TE70 heater's automatic work mode. This
mode is used when a part needs to be heated at a temperature defined
by the user and when the user wants to prevent the temperature of the
heated object from exceeding the set value, even in case of prolonged
exposure to infrared radiation. The TE70 heater will modulate power so
that the object to be heated will not exceed the temperature set on the
control unit.
Allows the user to access the TE70 heater's profile work mode. This
mode allows the generating of a temperature profile that varies over
time and that features up to 5 different temperature values. Heating,
according to a variable thermal profile, is useful to reduce paint drying
time or polymerization time of structural adhesives.
