TE70 IR-HEATER
PAGE 3
1.0 INTRODUCTION
This is a control unit for managing the infrared heating system used to
remove the panels glued to the inside of a motor vehicle.
-
Control unit equipped with color touch screen to facilitate the
management of the heater's programming parameters.
-
Three different operating modes:
o
Manual
o
Automatic
o
Temperature profile for the drying or adhesive
polymerization operations.
-
Temperature management both in °C and °F.
-
USB interface to load the pre-parameterized profiles for the
automatic and temperature profile operating modes.
-
Firmware upgrade through USB.
-
Alarms buzzer.
-
Automatic recognition of the type of heating tool connected to
the machine.
