TE70 IR-HEATER
PAGE 18
5.4 SETTING THE STEP DURATION
If you press the duration of the current step, a numeric keypad will
appear with which to set the time duration of the profile's current step.
If you set a current step duration of 0, the TE70 heater will skip the
execution of the current step and go to the next step, if present;
otherwise it will stop delivering power to the surface to be heated.
When you press the start button on the heating tool, the field reserved
to the duration of the current step will show the time remaining to the
end of the step.
Step duration is displayed in hh:mm format.
