TECNA TE 500, Руководство пользователя

Страница: 37 / 52

37 / 52
The welding pattern can be analyzed exhaustively by means of the welding check. It is possible to view
in detail the current values and the conduction degrees, read at each half-cycle of the main WELD1, the
values of any pre-welds and post-welds, and (if activated) the progress status of the stepper function.
To access these functions turn the key to RUN position, perform a weld and press key
:
to display the
first data video page. Then you may continue in the succeeding video pages as shown below.
Welding example with these parameters:
$
Pre-Weld Time 4 cycles
$
WELD1 Time 8 cycles
$
Post-Weld Time 0 cycles
$
Incremental step 1 (10000 spots / 18%)
WELDING ANALYSIS
PROG. 03 SPOTS 05148
WELD TIME 08.0
CURRENT 09.52 kA RMS
CONDUCTION DEG 110°
PROG. 03 SPOTS 05148
PREW 068°|POSTW 000°
04.0 ~ | 00.0 ~
05.90 kA | 00.00 kA
PROG. 03 SPOTS 05148
WELD CYCLE N. 01
POS+ 08.92 kA 098°
NEG- 09.10 kA 103°
SPOTS MAX 10000
SPOTS 05148
INCREMENT 09% OF 18%
STEP NUMBER 1 OF 1
PROG. 03 SPOTS 05148
WELD CYCLE N. 02
POS+ 09.32 kA 106°
NEG- 09.40 kA 110° PROG. 03 SPOTS 05148
WELD CYCLE N. 08
POS+ 09.60 kA 110°
NEG- 09.56 kA 110°
  

