8
Massage « Dry »
This apparatus can be used for a massage of the feet with and without water in
position 0.
In this case, to use the rollers located at the bottom of the tank.
In position 1, 2, 3 This apparatus must be used with water !
Massage « with water »
1. Take care that the electric cable is not connected before filling the apparatus.
2. For a pleasant massage, fill the tepid water apparatus.
NOTE : Not to exceed the maximum level indicated.
3. Place the apparatus on the ground in order to be able to comfortably sit you in
front of the apparatus.
4. Connect the apparatus only in one socket-outlet in good state.
5. Then, sit & place your feet in the apparatus.
6. Select the operating process. For that, to turn the button graduated to obtain the
following adjustments :
1. Massage burls for simulating the foot reflex zones
Air bubbles can itinerate & massage the feet skin mildly
2. Infrared fu Keep Warming
3. B Infrared fu Keep Warming
TO EMPTY
1. Turn all controls to the 'OFF' (ARRÊT) position.
2. Take out your feet of the unit
3. Unplug the unit.
4. Bring the apparatus to evacuation space like basin or sink.
5. Tip the unit, allowing water to spill out along the drain spout.
NOTE : Never pour water over the control switch.
CLEANING AND MAINTENANCE
Before cleaning, Always : switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The parts (removable) in contact with food like plate, bowl, forks, Spatula etc. can
be washed in hot water with sponge and soft detergent or put in the dishwasher.
Never plunge the apparatus in water or all other liquid !
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
