Mini-Line G198 operating manual
Page 8
When cleaning the asphalt paver, e.g. if using a high-pressure cleaner, as this may expose the Mini-
Line® Grade Control System to too large forces. The Mini-Line® Grade Control system should
therefore be removed before cleaning the asphalt paver.
The Mini-Line® Grade Control System can lead to serious personal injury
If warnings from the total risk assessment are not complied with. If the G198 is operated by a
person without training in operation and safe use, as he will not be able to fulfill the responsibility of
the operator.
If the Mini-Line® Grade Control System is used in dangerous areas or in dangerous
atmospheres/pressure levels, as the system is not designed to such operation.
Emergency Procedure
In case of accidents, break-downs or otherwise dangerous situations, the following
procedure should be followed
•
Press emergency stop
•
Turn off the asphalt paver and remove the key
•
Disconnect the cable between the Mini-Line® Grade Control System and the asphalt paver
•
Commence repair
Precautions
Inspect cables regularly for evidence of wear or deterioration
Inspect the receptacles and cable connectors for damages, dirt or water
Caution
Deposits of dirt, grease and asphalt in the receptacles can be cause for bad
electrical connection or data transmission
Caution
Asphalt deposits on the mechanical parts can hinder the free mechanical
movement and shows irregularities
General
Make sure that the Shoe or Tube Assy, Sensor Arm and Mini Line G198
recommendations are free from obstacles while in operation.
The cable connectors must be inserted in the appropriate way. Data
transmission will be corrupted in case connectors are wrongly plugged.
Regular maintenance of the equipment guarantees smooth operations and
good operation performances
Regularly clean and remove asphalt deposits or debris on both the G198 and
mechanical accessories
Care and
Mini Line
®
G198 is sealed to IP44 standard and can be cleaned and
Maintenance
washed with traditional cleansing fluids, though it is recommended to avoid
pouring water or other liquid directly onto the shaft and bearing
The mechanical accessories can be cleaned and washed thoroughly with same
cleaners used for shovels and rakes
