Technogym Step 500i, Руководство по техническому обслуживанию

Страница: 94 / 182

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 7.6
7.2.2. 700
I
E W
ELLNESS
TV T
OUCH SCREEN VERSION
7.2.2.1. NCB models
Figure 7.2-5
Carry out the procedure described in paragraph
7.1. “Disassembling the display”.
Then place the display on a work bench. It is
now possible to disassemble its circuit boards:
•
The CSafe board a .
•
The LCD inverter b ;
•
The connector board c ;
•
The CPU board d ;
•
The Touch Screen interface board e .
Figure 7.2-6
CSafe Board a :
1.
Unplug connector f from the CSafe board.
2. Remove the circuit board from the top.
Figure 7.2-7
LCD inverter b :
1.
Back off the two screws g using a Phillips
screwdriver.
2. Raise the inverter cover plate.
Continued on following page
→