20
Multi Hip
B
D
A
Replacing the cable
Cables must always be replaced at the first sign of wear, even if only the outer
rubber protection is worn.
WARNINGS
Carefully check the state of the cables once a month.
ALWAYS use cables supplied directly by Technogym.
To replace the cable, proceed as follows:
- remove pin (
A
) from the weight stack, shift the roller to the right or left to lift
weight stack crosspiece (
D
), then insert the pin in the second plate to hold
weight stack crosspiece (
D
) in the raised position;
- loosen screws (
B
) at the end of the cable, behind the central frame;
- pull out the cable from the cam side;
