21
A
B
C
Cables Crossed
replacing the cable
Cables must always be replaced at the first sign of wear, even if only the outer
rubber protection is worn.
WArnIngS
Carefully check the state of the cables once a month.
ALWAYS use cables supplied directly by Technogym.
The cable is joined to the high pulley and low pulley in the same way.
- remove any accessories;
- raise the rubber gaiter (
A
);
- unscrew the screws (
B
) and slide out the cable from the attachment (
C
);
- withdraw the entire cable from the equipment;
- insert the new cable (follow the original cable layout shown in the figure);
- insert the rubber gaiter (
A
) and the attachment (
C
); then tighten the screws (
B
);
- lower the rubber gaiter (
A
).
