Technogym ISOCONTROL, Руководство по техническому обслуживанию

Страница: 22 / 72

ISOCONTROL: Service & Maintenance Manual - rev. 1.2
Pagina 5.6
5.2.2.1 Templates for Selection machine frames which require drilling
MODEL
A B C D E F G H
M857 - M957 Abdominal Crunch
X
M818 - M918 Abductor
X
M817 - M917 Adductor X
M843 - M892 - M992 Arm Curl X
M845 - M945 Arm Extension
X
M865 - M965 Chest Incline
X
M870 - M970 Chest Press X
M821 - M921 Delts Machine X
M879 - M979 Glute
X
M912 Lat Machine
X
M810 - M890 - M990 Leg Curl X
M836 - M891 - M991 Leg Extension X
M851 - M951 Leg Press
X
M880 - M980 Low Row
X
M858 - M958 Lower Back X
M867 - M967 Multi Hip X
M813 - M913 Pectoral Machine
X
M849 - M949 Pulldown
X
M814 - M914 Pulley X
M815 - M915 Rotary Calf X
M850 - M950 Rotary Torso
X
M869 - M969 Shoulder Press
X
M883 - M983 Total Abdominal X
M846 - M946 Upper Back X
M871 - M971 Vertical Traction
X
MODEL A
The hole must be drilled about 212 mm from the
upper part of the top (see dimensions in the
figure), on the flat inner portion of the elliptical
tubing, at the centre point.
The machine in figure is viewed from behind.