Technogym EXCITE Run 500, Руководство по техническому обслуживанию

Страница: 64 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 5.4
5.3. INSTALLATION
To correctly install the machine, proceed as follows:
1.
Ensure that the specifications and requirements for installation have been met ( see paragraph
5.1. “Specifications and requirements” .)
2.
Position the machine as specified above, on a level surface that is free of vibrations and has
sufficient carrying capacity for the combined weight of the machine and user.
3.
The machine is shipped partially assembled and packed in a carton fixed to a wooden pallet.
Follow the assembly procedure described in the Installation Instructions supplied with each
machine.
4.
Connect the mains lead to the power inlet socket on the machine.
5.
Place the on/off switch in the “0” position.
6.
Plug the mains lead into the wall outlet.
7.
Connect the antenna cable to the wall outlet ( only for Wellness TV models ).
5.4. FIRST POWER-ON
After completing the installation procedure, the machine is ready to be powered up. To turn on the
machine, simply toggle the on/off switch from the “0” position to the “1” position.
During power-up the machine resets the incline. After completing the power-on reset, the machine
goes into standby, awaiting a keyboard command.
To check the correct operation of the machine:
•
get on the machine;
•
press the “Quick Start” key to begin exercising and check that the tread belt motor starts;
•
press the “+” and “-” keys on the keyboard and check that the tread belt speed varies
accordingly;
•
press the “
↑
” and “
↓
” keys and check that the incline varies accordingly;
•
press the emergency button and check that the tread belt stops;
•
put on the heart rate meter and check that the machine correctly reads the heart rate value;
•
grasp the sensors and check that the machine correctly reads the heart rate value;
•
check that the speed and elevation joystick works properly (only 700/700E - 900/900E
models).