Technogym EXCITE Run 500, Руководство по техническому обслуживанию

Страница: 136 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 7.28
7.17. AT UL DRIVER COMPONENTS DISASSEMBLY
Figure 7.17-1
With the Low Kit driver on a bench it is possible
to remove:
1.
Back off the 4 screws
(a)
using a medium
Phillips screwdriver.
2.
Lift up the cover.
Figure 7.17-2
1. Unplug the fan cable from the AT driver
board.
2.
Unscrew the two screws
(b)
using a medium
Phillips screwdriver.
3.
Remove the fan.
Figure 7.17-3
AT UL driver board:
1.
Unplug the flat cable coming from the AT
UL power supply board, shown in the
picture.
2.
Unscrew the screw
c
using a medium Phillips
screwdriver.
3.
Lift up the board paying attention to the
cables connected on the lower side.
Continued on following page
→