Technogym EXCITE Run 500, Руководство по техническому обслуживанию

Страница: 102 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 6.38
6.16. THERE IS NO HEART RATE SIGNAL
6.16.1. SALUTRON
TELEMETRIC RECEIVER
The machine displays this error if:
1. electromagnetic noise saturate the HR receiver which does not display any value due to a
specific SW filter which cut every signal, greater than 220 bpm;
2. the receiver is not working properly;
3. the receiver is not supplied by the display board.
THERE IS NO HR
SIGNAL
Is the v oltage at the input to the
receiv er, correct?
Is the v oltage at the output of
the display board, correct?
Replace the receiv er
Check the wiring and
earth connection and/or
replace the CU206 cable
2
3
YES
NO
YES
Replace display board
NO
Carry out the
troubleshooting procedure
"THE TELEMETRIC
SIGNAL IS INCORRECT"
1
4
Follow the procedure step by step to correctly diagnose the problem. Take particular care with the
checks highlighted by circled numbers, which are described in detail below: