Technogym BIOSTRENGTH LINE, Руководство по техническому обслуживанию

Страница: 554 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.380
7.9.33. D
ISASSEMBLING THE SEAT MOTOR UNIT
Figure 7.9.33-1
Follow the steps described in paragraph 7.9.24.
“Disassembling the rear guard” and 7.9.25.
“Disassembling the central guard”.
1. Cut the clamps
a .
2. Disconnect the cable connectors b .
3. Unscrew the screw c using a 6-gauge
hexagonal T-wrench.
Figure 7.9.33-2
4. Disconnect the cable connectors of the 2
microswitches.
5. Use a 4-gauge wrench to unscrew the 17
screws d .
Hold the MOTOR UNIT up before
unscrewing the screw. Use caution, as it
weighs 22 Kg.
Figure 7.9.33-3
Place the MOTOR UNIT on a bench:
6. Loosen the counter-nuts
d using an 8-gauge
wrench.
7. Unscrew the dowels e , using a 2.5-gauge
hexagonal T-wrench.
8. Remove the pin f .
9. Remove the winch g .
10. Remove the rack h .
Continued on next page
→