INTRODUCTION
The IR to USB adapter allows the user to download the stored
test data in the B500 into your computer. Once installed, the
test data is stored in a Windows based program for immediate
printing or saved in a file for future reference.
Plug into
Computer USB Port
IR Receiver
User
Instruction Manual
Techno Tools
Model B501
IR to USB Adapter
For use with the B500
Electrical System Analyzer
Print and Store Test Data from your PC
UTILITY MENU OPTIONS
The utility menu allows the user to set up the
IR Printer
they
will be using. When using the B501 IR to USB Adapter always
select the 22-22566 printer (IrDA protocol).
To Select the IR Printer:
Press and HOLD DOWN the
NEXT
+
button while
simultaneously pressing the MENU/ON-OFF button. Scroll
through the settings by continually pressing NEXT + until
SETUP PRINTER
is displayed.
Press
ENTER
. The default printer is the HHGA-5 (HPIr).
IMPORTANT:
The 22-22566 must be selected for the B501 to
work since the B501 requires IrDA protocol.
Press
NEXT +
to select the 22-22566 printer and then press
ENTER
.
SPECIFICATIONS
Infra Red Protocol:
IrDA
Normal dist. from Tester to Adapter:
18”
USB Cable:
Mini USB
USB cable length:
36”
Operating Temperature:
32°F to 120°F
Weight:
.25 LBS
Accessory Parts
Item
Part Number
USB Mini Cable
Instruction Manual
CD Installation Disc
NOTE: If you receive an error message on some Vista Ultimate
systems, follow the instructions below to disable the UAC:
1. Open Administrative Tools in Control Panel
2. Double-click on System Configuration
3. Click Continue to accept the UAC prompt
4. Select the Tools tab
5. Scroll down and select Disable UAC
6. Click Launch
7. Reboot your machine
RETURN FOR REPAIR POLICY
Every effort has been made to provide reliable, superior quality
products. However, in the event your instrument requires repair,
forward unit to Service Center freight prepaid to the address below with
return address, phone number and/or email address.
SERVICE CENTER
2651 W 81st Street
Hialeah, FL 33016
WARRANTY POLICY
The B501 Battery Diagnostic Tester is warranted to be free of defects
in materials and workmanship for a period of two years from the date
of purchase. This warranty applies to all repairable instruments that
have not been tampered with or damaged through improper use
including unauthorized opening of the unit. Please ship warranty units
that require repair freight prepaid to Service Center along with proof of
purchase, return address, phone number and/or email address.
Problems or Questions?
Call Toll Free: 1-800-222-0956
Figure 1
Align the
B500 with IR
to USB
Adapter to
Print or Save
to Computer
IR Transmitter
6
7
1
