such as Ultrasonic Software updates, to be faster and more reliable.
Multiple SoM upgrade kits are available, depending on the version of your UMCB:
l
P8000019905 SoM 2.0 upgrade kit for use in UMCB version 4.0 and UMCB-W
version 3 and above
l
P8000019988 SoM 2.0 upgrade kit for use in UMCB version 3.0 and UMCB-W
version 2 and below
l
P8000020133 SoM 2.0 upgrade kit (special Modbus) for use in UMCB version 3.0
and UMCB-W version 2 and below
P8000020134 SoM 2.0 upgrade kit (special Modbus) for use in UMCB version 4.0
and UMCB-W version 3 and above
The process of replacing the SoM is the same for all upgrade kits.
1.2.1 SoM Upgrade Kit Contents
All SoM upgrade kits include the following items:
l
A new SoM programmed for Ultrasonic Software 2.0
l
SoM-specific serial number label for placement on UMCB assembly
l
An anti-static wrist strap
l
Tweezers
l
A PH1 Phillips head (cross-head) screwdriver
l
UMCB shield SoM upgrade label
l
Two SoM mounting screws (spares)
l
Two SoM Spacers (spares)
1.3 Receipt of Equipment
When you receive your SoM Replacement Kit, you should check the exterior packing
case for any shipping damage.
If the packing case is damaged, contact the shipping carrier immediately regarding
their liability.
Bulletin MN0A005 Issue/Rev. 0.0 (4/22)
2
SoM Replacement Manual