Technimount System Cardiatek, Руководство пользователя

Страница: 24 / 46

24 CARDIATEK UG 202001-R01 www.technimount.com
Return To Table of Contents
INSTALLATION OF THE AIC INTO THE CARDIATEK BRACKET
7. Take the handle and gently lower the handle onto
the AIC to lock the handle securely into position.
NOTE
Some rubber cushions have been provided to
ensure a tighter fit with the bracket in order to limit
the vibration of the AIC inside the bracket during
transport.
WARNING
Ensure that the handle is properly locked into
position prior to manipulating it or installing it onto
another mounting system. Failure to do so can cause
injury to the patient or operator or cause damage to
the equipment.
INSTALLATION OF THE FLUID BAG
POLE
1. Install the Fluid Bag Pole into the nano base
located on the bottom plate at the back of the
mount.
2. Push in the Red Quick Release Mechanism to
install or remove the Fluid Bag Pole from the
nano base. Insert fluid pole from the top. Once
installed, release red quick mechanism to lock
into position.
Installation Guide