Technimount System Cardiatek Скачать руководство пользователя страница 18

Страница: 18 / 46

Return To Table of Contents

CARDIATEK UG 202001-R01

www.technimount.com

Introduction

NOTICE

The Cardiatek Mounting System is designed to comply with Federal Specifications for the Star-of-Life Ambulance

(KKK-A-1822) and SAE J3043.

Technimount hereby declares that the Cardiatek Mounting Systems (Bracket, Wall Mount and Floor Mount) are in

compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC and SAE J3043. A

copy of the original declaration of conformity can be obtained by contacting Technimount System’s Regulatory Affairs

Department:

Technimount System

C/O: Regulatory Affairs

[email protected]

+ 1 581.998.9820

WARNING

End User/Administrator is responsible to validate regulations and standards for safety in their region, in order to comply

with applicable safety regulations. Techninmount System is not responsbile to inform the End User/Administrator of

applicable legislation for safety in their area.

Содержание Cardiatek















































Результаты поиска

Содержание Cardiatek

Отзывы:

Похожие инструкции для Cardiatek

Бренды по названию

Популярные бренды

Technimount System Cardiatek, Руководство пользователя

Результаты поиска

Содержание Cardiatek

Отзывы:

Похожие инструкции для Cardiatek

Бренды по названию

Популярные бренды