English
- 10 -
to AV mode. If both sockets are employed at the same time, EXT 1 will override EXT 2 unless manually
selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.
The decoder might not function properly if you do not connect the decoder to the EXT 1 socket.
5. Component Video Inputs (YPbPr)
are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the
COMPONENT VIDEO INPUTS
on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “
Y
”,
“
Pb
”, “
Pr
” correspond with your device’s connectors.
6. PC/YPbPr
Audio
Inputs
are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr.
Connect the PC audio cable between the
AUDIO INPUTS
on the TV and audio output of your PC to
enable PC audio.
Connect the audio cable between
AUDIO INPUTS
on the TV and audio outputs of your device to
enable component audio.
7. S/PDIF Coaxial Out
outputs digital audio signals of the currently watched source.
Use an
SPDIF coaxial cable
to
transfer
audio signals to a device that has S/PDIF input.
8. RF
Input
connects to an antenna or a cable system..
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
Ethernet (LAN) Input is used for MHEG return channel (future service, currently under development by
9.
broadcaster).
PC Input
10.
is for connecting a personal computer to the TV set.
Connect the PC cable between the
PC INPUT
on the TV and the PC output on your PC.
11. HDMI 2: HDMI Input
HDMI 1: HDMI Input
12.
HDMI Inputs
are for connecting a device that has an
HDMI
socket. Your LCD Television is capable of
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. No sound
connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would defi nitely recommend to plug all your
cables into the back of the LCD before mounting to the wall.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 10
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 10
17.06.2010 13:10:03
17.06.2010 13:10:03
