101
(Continued)
Network
Cannot connect to the network.
•
Confirm the network connection and settings.
(
⇒
26)
•
If the network is set to be invisible, make the
network visible while you set up the network for
this unit or make a wired LAN connection.
•
This system’s Wi-Fi security supports WPA2
™
.
Your wireless router must therefore be WPA2
™
compatible. For details on the security supported
by your router and how to change the settings,
please refer to the operating instructions or
contact your internet service provider.
•
Make sure that the multicast function on the
wireless router is enabled.
•
The wireless LAN environment or radio
interference in your area may cause connection
problem. In this case, try another connection
method. If the problem persists, make a wired
LAN connection. (
⇒
28)
•
While the AC power supply cord is disconnected,
the LAN cable must be connected or
disconnected.
Cannot select this system as the output
speakers.
•
Make sure that the devices are connected to the
same network as this unit.
•
Reconnect the devices to the network.
•
Turn the wireless router off and then on.
•
Turn this unit to standby and on, and then select
this system as the output speakers again.
