manualshive.com logo in svg

Technicolor TG672, Руководство по установке и эксплуатации

Поделиться
Скачать
Technicolor TG672 Скачать руководство пользователя страница 53

45

4 CONFIGURATION TOOLS

E-DOC-CTC-20100728-0008 v2.0

Help:

Allows you to view context-related help information.

Each of these items contain a number of sub-menu items.

Login section

In the login section you can see the current user name.

By clicking the user name, you can:

Change your password.

Switch to another user.

Display level

The display level section allows you to switch the Technicolor Gateway GUI to:

The 

Basic

 level:

The 

Basic

 level allows you to configure the basic Technicolor Gateway settings and services. All changes that you make 

are saved automatically.

The 

Expert

 level:

The 

Expert

 level allows you to configure the advanced settings. When you click 

Expert

, the following menu items 

appear:

Technicolor Gateway

:

Allows you to view information on your Technicolor Gateway, configure or upgrade it.

IP Router

:

Allows you to view/configure the Technicolor Gateway IP interfaces, IP routing table and NAT entries.

Connections

:

Allows you to view/configure a broadband connection.

Local Networking

:

Allows you to view/configure the Technicolor Gateway DHCP server/client, the DNS configuration, the managed 
Ethernet switch.

Firewall

:

Allows you to view/configure the Technicolor Gateway Firewall.

VPN

 (if supported):

Allows you to configure the Technicolor Gateway for VPN.

SIP PBX

 (if supported):

Allows you to configure the Technicolor Gateway SIP PBX.

Language bar

If more than one GUI language is available, a language bar is showed. This language bar allows you to change the language 
of the Technicolor Gateway GUI.

Notification area

The notification area displays:

Error messages, indicated by a red traffic light.

Warning messages, indicated by an orange traffic light.

In 

Expert

 level, you must click 

Save All

 to make your changes permanent. If you do not do so, your changes will 

be lost after rebooting the device.

Содержание TG672

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды