49
6 INTERNET SECURITY
DMS-CTC-20140127-0004 v1.0
6.1.3 Manage devices
On the
Managed Devices
page you can create a device-specific rule to prevent a devices from accessing your network.
Procedure
1
Browse to the Admin Tool (http://192.168.0.1).
For more information, see
“Accessing the Admin Tool” on page 25
.
2
On the
Parental Control
menu, click
Managed Devices
.
3
In the
Enable Managed Devices
list, click
Enable
.
4
In the
Access Type
list, click:
Allow All
to allow all devices by default. In this case you have to create a rule for each device that you want to block on
your network.
Block All
to block all devices by default. In this case you have to create a rule for each device that you want to allow on
your network.
Adding allowed devices
If you selected
Block All
in the
Access Type
list, proceed as follows:
1
In the
Allowed Devices
table, click
+Add Allowed Device
.
2
The
Add Device to be Allowed
page appears.
3
Under
Set Allowed Device
, select your device from the
Learned Device(s)
list. If your device is not listed, enter the
computer name and MAC address under
Custom Device
.
4
If you want this rule only to be applied at specific time frames, click
No
in the
Always Allow
list and define when to apply the
rule:
a
Under
Set Allow Time
, enter a start time and end time
b
Under
Set Allow Days
, select the days for which the selected block time should be applied.
5
Click
Save
.
Adding blocked devices
If you selected
Allow All
in the
Access Type
list, proceed as follows:
1
In the
Blocked Devices
table, click
+Add Blocked Device
.
2
The
Add Device to be Blocked
page appears.
3
Under
Set Blocked Device
, select your device from the
Learned Device(s)
list. If your device is not listed, enter the
computer name and MAC address under
Custom Device
.
4
If you want this rule only to be applied at specific time frames, click
No
in the
Always Block
list and define when to apply the
rule:
a
Under
Set Block Time
, enter a start time and end time.
Optionally, you can provide a time schedule for a rule. The rule will then only be activated within the specified time
frame.
If you want to have different time schedules depending on the day, you have to group them in separate rules:
One rule for weekdays (for example, allow the device from 10:00 PM until 8:00 PM).
One rule for the weekend (for example, allow the device from 10:00 PM until 8:00 AM).
Содержание MediaAccess TC8717T
