Technicolor MediaAccess TC8717T, Руководство по установке и эксплуатации

Страница: 30 / 84

20
2 SETUP
DMS-CTC-20140127-0004 v1.0
2.4.2 How to manually connect your wireless client
Requirements

Your network device must be equipped with a Wi-Fi Certified wireless client.

Your network device must be configured to obtain an IP address automatically. This is the default setting.
Procedure
If you want to connect a computer using the wireless network, configure the wireless client on your computer with the wireless
settings printed on the Gateway's bottom panel label.
To configure these settings on:

Windows 8, proceed with “How to connect your computer on Windows 8” on page 21 .

Windows 7, proceed with “How to connect your computer on Windows 7” on page 21 .

Windows Vista, proceed with “How to connect your computer on Windows Vista” on page 22 .

Windows XP, proceed with “How to connect your computer on Windows XP” on page 23 .

Mac OS X, proceed with “How to connect your computer on Mac OS X” on page 24 .

On another operating system, consult the help of your wireless client or operating system.
For the network name, two values are available:

SSID 1 Name (2.4Ghz) is the network name of the 2.4 GHz access point and is of the following format:
TC8717TXX (where X is an alphanumeric character).

SSID 2 Name (5Ghz) is the network name for the 5 GHz access point and is of the following format:
TC8717TXX-5G (where X is an alphanumeric character).
The other values are common for both access points.
SSID 1 Name (2.4GHz) : ***************
SSID 2 Name (5Ghz) : ***************
Network Key (Password) : ***************
Encrytion : ***************