6
GB
• Some metal edges and the fins on the heat exchanger are sharp and must be handled carefully during cleaning to
prevent injury.
• Contact the After Sales Service for the exchanger, the condensate pump suction filter (for devices so equipped)
and other components of the device requiring regular specific maintenance carried out by a qualified technician.
AVOID :
• Blocking the appliance's air inlet and outlet grilles. If
they are blocked, the appliance will not work
satisfactorily and it may be damaged.
• Allowing the sun to shine directly into the room when
the appliance is operating in "cooling" mode. Use
shutters or curtains.
CHECK :
• That the filter is always clean. A clogged filter will reduce
the appliance's efficiency.
• That all doors, windows and other openings are closed
in order to prevent non-refrigerated air entering when
the appliance is operating in the "cooling" mode.
9 - ADVICE ON COMFORT AND ENERGY SAVING
8 - AIR FILTER
• The air filter behind the air intake grille should be checked and cleaned at least once every two weeks.
HOW TO REMOVE THE FILTER
FRONT
Spring
1-2
4
1. Grasp both ends of the air intake grille and pull it open.
2. Pull out the anti-mold filter.
3. Use vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse
it in clean water, and dry it.
4. When replacing the filter, make sure that the FRONT mark is facing you. After closing both sides, close the air intake grille
by pressing the center of the top of the grille until it snaps into place.
"AIR CLEAN" FILTER (ACCESSORY SUPPLIED ON REQUEST)
• The air filter is to be added by springs to the standard anti - mold filter.
• It is made of two layers:
- the first layer consist in a synthetic honey comb high efficiency media to
remove the dust and purifing the air
- the second layer in coarcoal media deodorizing the ambient air.
How to install the "Air clean" filter.
1. Open the unit intake air grille and pull out the standard air filter.
2. Apply on the rear side of anti-mold filter the two springs supplied with the
accessory.
3. Fix the "air clean" filter by the springs.
4. Insert the two air filters one over the other and close the intake grille.
Rear side of
anti-mold filter
3
"Air clean" filter
(high efficiency
honeycomb and
coarcoal media)