NOTE
During a heating operation
•
The room is heated for 15 minutes by warm air which has a slightly
higher temperature than usual.
•
When the HIGH POWER button is pressed during a defrosting
operation, the unit enters the HIGH POWER operating mode upon
completion of the defrosting operation.
Concerning HIGH POWER
operations
Setting the HIGH POWER Operation (continued)
When operating one
indoor unit
During a cooling operation
•
The room is cooled down for 15 minutes by cooling at a slightly lower
temperature than usual, and the fan speed is set to the highest fan
speed setting.
During a drying operation
•
If the room temperature is higher than the temperature setting, the
room is cooled down for 15 minutes by cooling at a slightly lower
temperature than usual, and if it is close to the temperature setting,
the drying operation is performed, and the fan speed is set to the
highest fan speed setting.
During a cooling or drying operation
•
The room is cooled down for 15 minutes by cooling at a slightly lower
temperature than usual, and the fan speed is set to the highest fan
speed setting.
•
When the unit is used continuously for 15 minutes, the temperature
setting has been reached during a cooling or heating operation or the
humidity setting has been reached during a drying operation (which is
only when one indoor unit is operated), operation will continue for
the next 5 minutes at a reduced power level, after which the regular
operation is restored.
If the setting is not reached in either case, regular operation is
restored immediately.
•
After HIGH POWER operation has finished or when a HIGH POWER
operation has been canceled on the way and then reinstated, regular
operation is performed for about 5 minutes to protect the unit, and
then the HIGH POWER operation is performed.
•
During HIGH POWER operations, the room temperature may not
coincide with the temperature setting.
When operating multiple
indoor units
Tips for Energy Saving
Do not
•
Block the air intake and outlet of the unit. If they are obstructed, the
unit will not work well, and may be damaged.
•
Let direct sunlight into the room. Use sunshades, blinds or curtains. If
the walls and ceiling of the room are warmed by the sun, it will take
longer to cool the room.
Do
•
Always try to keep the air filter clean. (Refer to “Care and Cleaning”.)
A clogged filter will impair the performance of the unit.
•
To prevent conditioned air from escaping, keep windows, doors and
any other openings closed.
21
